Floor Priming?
03-31-14, 05:14 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Floor Priming?
Ok so i removed all factory sound deadening to replace with damplifier but there are some areas that i had to wire brush down and some metal is exposed. I would like to give the floor a good coat of some kind of rust preventing paint like VHT epoxy paint. Thing is it only comes in black and car is red. The damplifier is gonna go over the black epoxy paint then the rug is going back in should i worry about the under floor board being black and the car is red? Would it hurt resell value?
04-01-14, 07:58 AM
#2
RX-7 Bad Ass
iTrader: (55)
If some buyer is so **** that they'll pull the carpet up to check the paint color and go "Aha!" and try to bargain you down, you've got an ******* buyer.
In other words, I wouldn't worry about resale value.
You could also just prime it with a zinc primer then paint that with a red top coat.
Dale
In other words, I wouldn't worry about resale value.
You could also just prime it with a zinc primer then paint that with a red top coat.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM