3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

fixing the heater

Thread Tools
 
Search this Thread
 
Old May 16, 2008 | 06:50 PM
  #1  
AWD-RWD racer's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (5)
 
Joined: Apr 2006
Posts: 1,488
Likes: 0
From: pennsylvania
fixing the heater

before when i had my 13b in the car it did not blow hot air (air temp at best) now that im taking the engine out and doing a ls1 is there anything that i can do to make the heat hotter (ive moved from fl to pa so winter wil be brutal)
thanks!
__________________
Reply
Old May 16, 2008 | 06:54 PM
  #2  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
I would start by flushing the heater core.
Reply
Old May 16, 2008 | 07:26 PM
  #3  
bajaman's Avatar
Constant threat
Tenured Member 20 Years
 
Joined: Jul 2001
Posts: 4,968
Likes: 39
From: near Wichita, Kansas
^ Mahjik as always speaks the truth, young one.

I had a COMPLETELY plugged core, and very successfully unplugged it. There is a thread on it somewhere.....
Reply
Old May 16, 2008 | 07:30 PM
  #4  
bajaman's Avatar
Constant threat
Tenured Member 20 Years
 
Joined: Jul 2001
Posts: 4,968
Likes: 39
From: near Wichita, Kansas
https://www.rx7club.com/showthread.p...ht=heater+core

I have NUCLEAR heat now....
Reply
Old May 16, 2008 | 10:59 PM
  #5  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
I suspect that it has nothing to do with your heater core, or piping. The "door" that should open to allow hot air into the system is probably stuck closed. It's the door that is adjusted by the temp **** on your dash. In order to fix it, much of the dash has to be pulled out.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM




All times are GMT -5. The time now is 09:29 AM.