First time at the drag strip.
First time at the drag strip.
I'm satisfied with my time.
1/4 13.83
0-60 2.26
speed 155 km/h (ca 96 mph)
My only mods are:
3" DP, pettit 3" highflow cat, 3" catback
open air filters.
My boost is 9 psi
what do u think about my time?
1/4 13.83
0-60 2.26
speed 155 km/h (ca 96 mph)
My only mods are:
3" DP, pettit 3" highflow cat, 3" catback
open air filters.
My boost is 9 psi
what do u think about my time?
Joined: Mar 2001
Posts: 30,793
Likes: 646
From: FL-->NJ/NYC again!
A 13.2 to 13.5 at about 106-107 is more indicative of your mods if you crank the boost up to 12 psi. Are you still running a stock ecu? The trap speed especially is way low, even for 9 psi. Btw, that is your 60 foot time, not your 0-60 time
. I don't mean to be too negative, keep on practicing and I'm sure you'll get better
. I don't mean to be too negative, keep on practicing and I'm sure you'll get better
i know my speed is too low, the second run i had 100 mph, i ment 0-60 foot, thought that was obvious.
Don't think i need 12 psi to get to 13.2-13.5, i only need better tires cause my start was bad and i had borrowed the tires from a friend and had not driven with them at all before the race.
Don't think i need 12 psi to get to 13.2-13.5, i only need better tires cause my start was bad and i had borrowed the tires from a friend and had not driven with them at all before the race.
Here's a 8 meg big movie of me and two other RX-7's at the strip.
http://w1.314.telia.com/%7Eu31435106...eos/warace.WMV
http://w1.314.telia.com/%7Eu31435106...eos/warace.WMV
i'd say you know what you need to do. the 60foot is a lil high, the new tires would help, but i bet you can even get down with just practice.
why are you only running 9psi? and how do you keep it there, with such a free flowing intake/exhaust?
why are you only running 9psi? and how do you keep it there, with such a free flowing intake/exhaust?
Trending Topics
I've made the poorman's boost controller and exchanged the hoses with the pills between turbos and wastegate and added an adjustable valve. only cost me about 10 dollars.
I can make more then 9 psi but then i get boost peaks when the second turbo kicks in.
I can make more then 9 psi but then i get boost peaks when the second turbo kicks in.
Thread
Thread Starter
Forum
Replies
Last Post
Claudio RX-7
Haltech Forum
5
Apr 23, 2019 02:50 PM
turbo-minivan
General Rotary Tech Support
69
Feb 4, 2016 12:29 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM







