3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

First start after 6+ months. Precautions?

Thread Tools
 
Search this Thread
 
Old Mar 8, 2012 | 03:18 PM
  #1  
red_dragon's Avatar
Thread Starter
Senior Member
Tenured Member: 15 Years
iTrader: (10)
 
Joined: May 2006
Posts: 628
Likes: 2
From: Bay Area, CA
First start after 6+ months. Precautions?

Hey all,
My car has been stuck at a shop for over a year and hasn't been started in about 6-7 months. Ya it sucks. Don't ask, it's too annoying to think about lol.

What precautions should I take before I fire it back up? Only thing I thought of was to not drive hard on whatever gas was left, and give it fresh gas.
Reply
Old Mar 8, 2012 | 03:59 PM
  #2  
RotaryRX-007's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Apr 2008
Posts: 169
Likes: 1
From: Melbourne Beach, FL
Fresh plugs and oil wouldn't be a bad thing either. Pull the EGI and crank the engine over for a few seconds to prime the oil system and work the fresh oil into the bearings.

Other then that, make sure there is proper air pressure in the tires.
Reply
Old Mar 8, 2012 | 04:24 PM
  #3  
TheAsset's Avatar
Mr.Epic
Tenured Member 10 Years
iTrader: (11)
 
Joined: Jul 2009
Posts: 683
Likes: 2
From: Missouri
Honestly, if you want a realistic answer, you should take every precaution. Especially so, given how you've presented your question.
Reply
Old Mar 8, 2012 | 04:38 PM
  #4  
XLR8's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (52)
 
Joined: Oct 2001
Posts: 3,902
Likes: 10
From: NJ
Originally Posted by red_dragon
Hey all,
My car has been stuck at a shop for over a year and hasn't been started in about 6-7 months. Ya it sucks. Don't ask, it's too annoying to think about lol.

What precautions should I take before I fire it back up? Only thing I thought of was to not drive hard on whatever gas was left, and give it fresh gas.

- Check ALL fluids first.

- I wouldn't drive it at all on the old gas. Get a 5 gallon can and put fresh in. If your still concerned a gallon of Toluene will work wonders on bumping that octane up.

- Oil change.

- Mods? Battery been connected? You may have to perform the idle relearn, so when you do start it, perform this function.

- Once all is well, drive it easy for a bit. Gradually show it load and boost. I would drive it a time or two before doing full boost WOT runs. Let things settle again.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx7jocke
Suspension/Wheels/Tires/Brakes
72
Jun 17, 2016 03:48 AM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM




All times are GMT -5. The time now is 10:41 PM.