few problems
#1
Senior Member
Thread Starter
few problems
ok, first is high idle. 1100-1200 all the time, with 15 in vac. i tried adjusting the screw and all i could do was raise the idle.
i also noticed while revving it a little under the hood, it sounds like my turbos are kinda of buzzing when they spool down, and a little when they first start spooling...is this normal?
i also noticed while revving it a little under the hood, it sounds like my turbos are kinda of buzzing when they spool down, and a little when they first start spooling...is this normal?
#2
Mr. Links
iTrader: (1)
Re: few problems
Originally posted by racerfoo
ok, first is high idle. 1100-1200 all the time, with 15 in vac. i tried adjusting the screw and all i could do was raise the idle.
ok, first is high idle. 1100-1200 all the time, with 15 in vac. i tried adjusting the screw and all i could do was raise the idle.
Originally posted by racerfoo
i also noticed while revving it a little under the hood, it sounds like my turbos are kinda of buzzing when they spool down, and a little when they first start spooling...is this normal?
i also noticed while revving it a little under the hood, it sounds like my turbos are kinda of buzzing when they spool down, and a little when they first start spooling...is this normal?
#3
Senior Member
Thread Starter
only gettin 6lbs of boost....trying to find a leak.....buzz i dont really know, when the turbos are spooling its tne normal nice whistleish noise, but this is more like a bzzhhh, dunno how to describe it
#5
Mr. Links
iTrader: (1)
Originally posted by racerfoo
only gettin 6lbs of boost....trying to find a leak.....buzz i dont really know, when the turbos are spooling its tne normal nice whistleish noise, but this is more like a bzzhhh, dunno how to describe it
only gettin 6lbs of boost....trying to find a leak.....buzz i dont really know, when the turbos are spooling its tne normal nice whistleish noise, but this is more like a bzzhhh, dunno how to describe it
How long has the boost been like this?
Seems like you have a vacuum leak and/or some non-functioning soleniods. Here's a thread of a similar situation:
https://www.rx7club.com/forum/showth...threadid=56820
I would suggest starting there. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM