FD runs low 11s with full interior, sound system and 20 inch rims!
FD runs low 11s with full interior, sound system and 20 inch rims!
Hey guys!
This car rolls on 20 inch rims and used to be sponsored by Sony. As you see it in this picture, the car weighs 3000lbs and it runs 11.3 @ 126. Full interior, full system and 20s on the front!! It ran the time on slicks of course and with a slipping clutch. A twin plate clutch is being installed.
The engine has been rebuilt with standard seals, large street port and a few other
Turbo is a TA45 Garrett with 76mm front wheel and a 1.05 exhaust housing with a 68mm blade I believe. The time was run on C16 and the temp outside was well into the 90s. Wastegate is HKS 60mm and exhaust manifold is custom made by the workshop. Intercooler is custom made as is the i/c piping.
ECU is a Microtech LTX8. Primary injectors are standard and secondary are 1650cc I believe, not 100% sure on manufacturer, more than likely bosch.
The diff is a 4.44 LSD, not sure of manufacturer, I can check if anyone is interested. Also, the drive shafts are standard Mazda. The car drove itself onto the trailer at the end of the day






Steve
This car rolls on 20 inch rims and used to be sponsored by Sony. As you see it in this picture, the car weighs 3000lbs and it runs 11.3 @ 126. Full interior, full system and 20s on the front!! It ran the time on slicks of course and with a slipping clutch. A twin plate clutch is being installed.
The engine has been rebuilt with standard seals, large street port and a few other
Turbo is a TA45 Garrett with 76mm front wheel and a 1.05 exhaust housing with a 68mm blade I believe. The time was run on C16 and the temp outside was well into the 90s. Wastegate is HKS 60mm and exhaust manifold is custom made by the workshop. Intercooler is custom made as is the i/c piping.
ECU is a Microtech LTX8. Primary injectors are standard and secondary are 1650cc I believe, not 100% sure on manufacturer, more than likely bosch.
The diff is a 4.44 LSD, not sure of manufacturer, I can check if anyone is interested. Also, the drive shafts are standard Mazda. The car drove itself onto the trailer at the end of the day







Steve
**** that is a nice paint job.. where they get that at... oh yea i forgot this isnt the FL SE board. :o damn
i want a paint job like that just NOT in pink
maybe like a Dark Green
i want a paint job like that just NOT in pink
maybe like a Dark Green





