FD Front and Rear Rotor housing different?
04-21-03, 04:59 PM
#1
Full Member
Thread Starter
Join Date: Jul 2002
Location: JAPAN
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
FD Front and Rear Rotor housing different?
Here is the situation: I picked up a FD block from a local shop that they no longer wanted. I am going to pull it apart and check all the clearences, then overhaul it. I noticed that the front rotor housing has the R stamped on the top. Does it really matter what order they go in? The only difference I can see is the Knock sensor should go in the front rotor housings. Would there be a problem if you just had the rotor housings swapped? I am just curious and it makes me question the quality of this shops work. Thanks
04-21-03, 06:04 PM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,829
Received 2,597 Likes
on
1,845 Posts
they are different. the air injection passages are mirror imaged, so thats the difference
mike
mike
Thread
Thread Starter
Forum
Replies
Last Post
cdn
2nd Generation Specific (1986-1992)
14
09-10-15 06:23 AM
cdn
2nd Generation Non-Technical and pictures
0
08-11-15 08:59 PM
diference, difference, fd, front, housing, housings, identify, interchange, interchanged, mazda, motor, overhauling, rear, rotor, rx7
