3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Fan wiring and relay R and R

Thread Tools
 
Search this Thread
 
Old Apr 9, 2011 | 07:25 AM
  #1  
G's 3rd Gen's Avatar
Thread Starter
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
iTrader: (11)
 
Joined: Sep 2003
Posts: 3,067
Likes: 7
From: Home of the Rolex 24
Fan wiring and relay R and R

Does anyone have good info. on replacing the part of the wiring harness that contains the fan relays? I am assuming it runs through the passenger fender. Thanks G
Reply
Old Apr 9, 2011 | 01:31 PM
  #2  
Wompa164's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Oct 2002
Posts: 1,677
Likes: 10
From: Dallas, TX
I've been dealing a lot with this subject recently on my LS2 conversion, what is it that you need help with specifically?
Reply
Old Apr 9, 2011 | 04:25 PM
  #3  
G's 3rd Gen's Avatar
Thread Starter
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
iTrader: (11)
 
Joined: Sep 2003
Posts: 3,067
Likes: 7
From: Home of the Rolex 24
Originally Posted by Wompa164
I've been dealing a lot with this subject recently on my LS2 conversion, what is it that you need help with specifically?
the person before I owned the car hacked up the harness and cut all they fan relays off. The fans are rewired directly to switched 12v and constantly run and at 1 speed. I am wanting to purchase that part of the harness and make it right. I have the fsm and looking at pg z42 and 43 I cannot clarify where the wires come from exactly. G
Reply
Old Apr 9, 2011 | 05:47 PM
  #4  
Wompa164's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Oct 2002
Posts: 1,677
Likes: 10
From: Dallas, TX
Well unfortunately 'that part' of the harness is the entire front chassis harness. If it was really bad, you might think about buying a new or used replacement chassis harness. Can you provide any pictures?
Reply
Old Apr 11, 2011 | 03:43 PM
  #5  
G's 3rd Gen's Avatar
Thread Starter
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
iTrader: (11)
 
Joined: Sep 2003
Posts: 3,067
Likes: 7
From: Home of the Rolex 24
Originally Posted by Wompa164
Well unfortunately 'that part' of the harness is the entire front chassis harness. If it was really bad, you might think about buying a new or used replacement chassis harness. Can you provide any pictures?
I see. How big of a job is it to replace that? Fenders off, front end off, etc.
Reply
Old Apr 11, 2011 | 04:50 PM
  #6  
Wompa164's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Oct 2002
Posts: 1,677
Likes: 10
From: Dallas, TX
From what I remember it involves pulling a lot of the dash
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vmerino
2nd Generation Specific (1986-1992)
0
Sep 5, 2015 11:26 AM
Murilli
Midwest RX-7 Forum
0
Sep 3, 2015 09:10 AM




All times are GMT -5. The time now is 10:09 AM.