Exhaust tempeture range
#3
Full Member
Join Date: Feb 2001
Location: Austin, Texas, USA!
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Atilla is right on the money. I see about 850C at cruise (5th gear, 3000 rpm, 80 mph, and my A/F reading about 14.7) and around 500C (I think) at idle. It differs with driving conditions of course. Just for reference my sensor is mounted in the exhaust manifold before the turbos on the #2 rotor.
#4
OG
Thread Starter
ok cool.. because I have EGT on the way....
Where is the best place to put it.. I have a spot on my dp...about 10 inches from the exhaust manifold....is that a good place ????
thanks again,
Johnny
Where is the best place to put it.. I have a spot on my dp...about 10 inches from the exhaust manifold....is that a good place ????
thanks again,
Johnny
#7
Full Member
Join Date: Jul 2001
Location: Leavenworth, KS
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
I am about ready to install an egt as well, I noticed Magnificent7 has his mounted before the turbos. Is this better than in the downpipe right at the turbo outlet? I am just asking for my own reference, I want to put my gauge in the best possible spot. Thanks.
Trending Topics
#8
Full Member
Join Date: Feb 2001
Location: Austin, Texas, USA!
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 50tooslow
I am about ready to install an egt as well, I noticed Magnificent7 has his mounted before the turbos. Is this better than in the downpipe right at the turbo outlet? I am just asking for my own reference, I want to put my gauge in the best possible spot. Thanks.
I am about ready to install an egt as well, I noticed Magnificent7 has his mounted before the turbos. Is this better than in the downpipe right at the turbo outlet? I am just asking for my own reference, I want to put my gauge in the best possible spot. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM