Exhaust Flame Bumper Protection
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
Exhaust Flame Bumper Protection
Ok, does anyone know what it is I am talking about? I have only seen it once in a photo. Basically it looks like a piece of metal that sticks to your bumper right above the exhaust. It protect your rear bumper from melting when you shoot flames.
Is this something that can be bought or was it fabbed?
thanks again.
Is this something that can be bought or was it fabbed?
thanks again.
#3
AponOUT!?
iTrader: (31)
dont they sell those at autozone in the ricer section?
no joke, last time i was in autozone to get some anti-freeze, i walked passed the ricer isle, and i saw them. they are like 4 or 5 inch wide shiny metal plates, that stick on to your bumper right above where ur exhaust tip is right?
i have also seen a few cars around my town that have them, but i dont know why, they didnt seem to need them.... why not just wash your bumper more often? or u could always make one.
no joke, last time i was in autozone to get some anti-freeze, i walked passed the ricer isle, and i saw them. they are like 4 or 5 inch wide shiny metal plates, that stick on to your bumper right above where ur exhaust tip is right?
i have also seen a few cars around my town that have them, but i dont know why, they didnt seem to need them.... why not just wash your bumper more often? or u could always make one.
#4
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Fujikuro
why not just wash your bumper more often? or u could always make one.
why not just wash your bumper more often? or u could always make one.
ATTAIN in Japan sells them. I would contact Jason at JT Imorts or Inukai as they can get them for you.
#6
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Autozone would sell trendy ricer ones ... probably not very good quality. Plus the FD's bumper near the exhaust has some strange shapes and curves, so those universal Honda types might not be very well suited.
You have a few options. You could just buy metal tape. Or you can make one and stick it on ... but I'm not sure what adhesive would be best, probably something like Goop. You could also make one and rivet it on. Or you could make one and ........ nah ..... I can't give away too much.
You have a few options. You could just buy metal tape. Or you can make one and stick it on ... but I'm not sure what adhesive would be best, probably something like Goop. You could also make one and rivet it on. Or you could make one and ........ nah ..... I can't give away too much.
Trending Topics
#8
yeah, just get some thin sheet metal and mold it to shape. Or you can make one of carbon fiber and mold that on too.
For FDs with midpipes, its a semi-needed item more than a fashion statement. My bumpers rear paint looks all funky and dark now.
Danny
For FDs with midpipes, its a semi-needed item more than a fashion statement. My bumpers rear paint looks all funky and dark now.
Danny
#9
I'm a CF and poop smith
do you mean something like this
http://silverfd.efiunlimited.com/cf2/PC120001.jpg
http://silverfd.efiunlimited.com/cf2/PC120002.jpg
http://silverfd.efiunlimited.com/cf2/PC120005.jpg
http://silverfd.efiunlimited.com/cf2/PC120006.jpg
http://silverfd.efiunlimited.com/cf2/PC120007.jpg
http://silverfd.efiunlimited.com/cf2/PC120008.jpg
http://silverfd.efiunlimited.com/CF/...shield0004.jpg
http://silverfd.efiunlimited.com/CF/...shield0006.jpg
Note: They still have to be trimmed to shape (the first one I cut out was pretty screw up hehe but its ok) and yes I made those These might be for sale soon but I'm not sure.
here is the web site for the only other place i could find that made these http://www.ksp-eng.co.jp/ATTAIN/menu2/5.html
Note: The price is about 12,000-24,000yen which is about 120-240 bucks US just about...
P.S. They must be attached with rivits cuz double sided sticky tape will not work (actually it will stay on there but it kinda looks like *** since the double sided sticky tape makes it bump/stick out a bit)
http://silverfd.efiunlimited.com/cf2/PC120001.jpg
http://silverfd.efiunlimited.com/cf2/PC120002.jpg
http://silverfd.efiunlimited.com/cf2/PC120005.jpg
http://silverfd.efiunlimited.com/cf2/PC120006.jpg
http://silverfd.efiunlimited.com/cf2/PC120007.jpg
http://silverfd.efiunlimited.com/cf2/PC120008.jpg
http://silverfd.efiunlimited.com/CF/...shield0004.jpg
http://silverfd.efiunlimited.com/CF/...shield0006.jpg
Note: They still have to be trimmed to shape (the first one I cut out was pretty screw up hehe but its ok) and yes I made those These might be for sale soon but I'm not sure.
here is the web site for the only other place i could find that made these http://www.ksp-eng.co.jp/ATTAIN/menu2/5.html
Note: The price is about 12,000-24,000yen which is about 120-240 bucks US just about...
P.S. They must be attached with rivits cuz double sided sticky tape will not work (actually it will stay on there but it kinda looks like *** since the double sided sticky tape makes it bump/stick out a bit)
#10
Eats, Sleeps, Dreams Rotary
Join Date: Aug 2002
Location: Dallas, TX
Posts: 3,119
Likes: 0
Received 0 Likes
on
0 Posts
Yeah but then when you have that plate on there, the rest of the paint will fade normally over time, but if you take it off, it'll look fugly.
Just make sure you're gonna keep the midpipe setup for good if you do that.
Just make sure you're gonna keep the midpipe setup for good if you do that.
#11
Eats, Sleeps, Dreams Rotary
Thread Starter
the only one I have seen on here is a dude with an ORANGE 7 and it was pretty damn sweet looking...I don't think his was carbonfiber but more of a polished or brushed aluminum look. Dude with the ORANGE 7 where are you and where did you get your bumper guard cuz I want one too!
#12
Ding King
iTrader: (4)
stevecod's got what you are referring to on his badass FD. Here is a link with some pics that show his bumper and his new FEED rear spoiler/wing.
https://www.rx7club.com/forum/showth...hreadid=142134
https://www.rx7club.com/forum/showth...hreadid=142134
#13
Dave, do a search on STEVECOD, he has one and I am pretty sure he made it himself or had the boys at A-Spec do it for him. Oh and god damn I hate that word FUGLY, stupidest thing I have ever heard, just thought I would share that, lol,
Steve
Steve
#16
Eats, Sleeps, Dreams Rotary
Thread Starter
Nope, it's not Mr. Cods car...it was a bright orange fd and it was a forum member...I remember seeing it when he was talking about just finishing up his tail light mod...seemed his was a lot nicer finish than Mr. Cods
#21
Senior Member
Join Date: Mar 2001
Location: Chicago, IL
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by apneablue
Nope, it's not Mr. Cods car...it was a bright orange fd and it was a forum member...I remember seeing it when he was talking about just finishing up his tail light mod...seemed his was a lot nicer finish than Mr. Cods
Nope, it's not Mr. Cods car...it was a bright orange fd and it was a forum member...I remember seeing it when he was talking about just finishing up his tail light mod...seemed his was a lot nicer finish than Mr. Cods
#23
Originally posted by stevecod
It is ZeroR's orange FD you are talking about. the owner of A-spec Tuning's car. I made that for him his is like a month or 2 old and mine is like 5 yrs. old.
It is ZeroR's orange FD you are talking about. the owner of A-spec Tuning's car. I made that for him his is like a month or 2 old and mine is like 5 yrs. old.
Steve
#25
I'm a CF and poop smith
Originally posted by Scrub
I want one of those head shields, there really nice looking. I don't wanna melt my bumper, although it does give a mean look to it.
I want one of those head shields, there really nice looking. I don't wanna melt my bumper, although it does give a mean look to it.