Exhaust fabrication question ( J , U 45deg bends )
Thread Starter
Senior Member
iTrader: (6)
Joined: Jan 2008
Posts: 436
Likes: 1
From: Montreal , Canada
Exhaust fabrication question ( J , U 45deg bends )
this is mainly aimed at those who have fabbed their own cat backs ...
i want to order ( in 3" ) ... a U bend .. and a 45deg .. and 3 feet or so of pipe
should that be enough to get the shape required
, what are your experiences with pieces ...
from what i have seen , it`s mainly 2 45 degs welded at some angles such as this one :
any info would be appreciated
thx
i want to order ( in 3" ) ... a U bend .. and a 45deg .. and 3 feet or so of pipe
should that be enough to get the shape required
, what are your experiences with pieces ...from what i have seen , it`s mainly 2 45 degs welded at some angles such as this one :
any info would be appreciated
thx
Rotary Freak
Joined: Jun 2005
Posts: 1,677
Likes: 287
From: sydney
Wire bent to mirror bends and straights - unfold - voila, required length. Pretty easy to work out angles in a rudimentary fashion with a piece of string and a plastic protractor, if nothing more sophisticated available..
Thread
Thread Starter
Forum
Replies
Last Post