Fjnally got my car back from getting my fender flares molded on. Now on to installing my evo r re headlights. The instructions aren't very clear. Does someone know where I can find more detailed instructions?

Also, after my wreck, I got the stock headlights completely removed, motors included, and now my gauges dont light up, my corner lenses and rear lights don't turn on. When I try to turn the lights on, I can hear a click from the engine bay. Are the lights not working bc I removed the stock motors for the headlight and now the circuit is open? Or is there some other problem? Anyone who knows what the answer is, I would be super grateful for the help of a fellow board member.

Thanks guys.

 

I have the EVO lights, what are you having a hard time with?


You need to resolve that electrical issue before going forward though. Find the relay and go from there.

http://www.rotaryheads.com/PDF/3rd_gen/

 

Def check the wiring and relay.

I have the evo's and i don't have a problem with them..you have an actual electrical problem. Not a evo headlight problem.

 

Ok. Thanks guys. I'll check my relays this weekend.
As for the evo headlights. How do I wire up the high beams. Everything else makes sense.

 

Did you just unplug the stock motors and head lights and plug the new ones in? Or did you have to close the circuit on the headlight motors before proceeding?

 

go grab the electrical manual in the archives. Its pretty much plug and play, just need to make sure you are connecting the right wires connected for low/high/ground. Dont worry about headlight motor circuit...just protect those connectors.