Engine Wiring Harness Question --
Thread Starter
Rotary Lover
Joined: Apr 2007
Posts: 427
Likes: 0
From: Buenos Aires, Argentina
Engine Wiring Harness Question --
Hi everyone!
I have a '94 FD, VIN JMZFD13B200100704 -- and I was wondering, will any of these Engine Wiring Harnesses fit properly/work?
http://cgi.ebay.com/ebaymotors/Mazda...ayphotohosting
http://cgi.ebay.com/ebaymotors/JDM-R...3286.m20.l1116
-- Are all Engine Wiring Harnesses the same?
Thank you for your time!
Regards,
-D
I have a '94 FD, VIN JMZFD13B200100704 -- and I was wondering, will any of these Engine Wiring Harnesses fit properly/work?
http://cgi.ebay.com/ebaymotors/Mazda...ayphotohosting
http://cgi.ebay.com/ebaymotors/JDM-R...3286.m20.l1116
-- Are all Engine Wiring Harnesses the same?
Thank you for your time!
Regards,
-D
The JDM harness won't fit properly, as in a JDM car, the ECU is on the left side, vs the USDM car where the ECU is on the right side.
As for the used one, I hear Mazsport is fairly reputible, but what's the point in replacing your harness now for $400 + labor when you'll need to do it again in 3 years. I'd get a new one instead. They're $750 from Malloy, last I checked. It'll last 10+ years, and with the way the price has been climbing, who knows how much they might cost in 3 years.
As for the used one, I hear Mazsport is fairly reputible, but what's the point in replacing your harness now for $400 + labor when you'll need to do it again in 3 years. I'd get a new one instead. They're $750 from Malloy, last I checked. It'll last 10+ years, and with the way the price has been climbing, who knows how much they might cost in 3 years.
Thread Starter
Rotary Lover
Joined: Apr 2007
Posts: 427
Likes: 0
From: Buenos Aires, Argentina
The JDM harness won't fit properly, as in a JDM car, the ECU is on the left side, vs the USDM car where the ECU is on the right side.
As for the used one, I hear Mazsport is fairly reputible, but what's the point in replacing your harness now for $400 + labor when you'll need to do it again in 3 years. I'd get a new one instead. They're $750 from Malloy, last I checked. It'll last 10+ years, and with the way the price has been climbing, who knows how much they might cost in 3 years.
As for the used one, I hear Mazsport is fairly reputible, but what's the point in replacing your harness now for $400 + labor when you'll need to do it again in 3 years. I'd get a new one instead. They're $750 from Malloy, last I checked. It'll last 10+ years, and with the way the price has been climbing, who knows how much they might cost in 3 years.
The car is '94, LHD and has a speedometer in kilometers...
Any help?
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
The worst possible thing you can do is purchase something electrical possibly 15 years old. It will be dry rotted, brittle, and as bad as anything you currently have. Save your money and purchase a new harness from Malloy Mazda for under $500.
Thread Starter
Rotary Lover
Joined: Apr 2007
Posts: 427
Likes: 0
From: Buenos Aires, Argentina
Trending Topics
Get a new harness from the States. I realize your customs agents are very corrupt and it'll be a major hassle for you to actually retrieve it, but to my knowledge, you're not allowed to import used car parts anyway.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM
