Engine Torque Damper Options
#1
Rotary Enthusiast
Thread Starter
Join Date: Jul 2003
Location: Toronto
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Engine Torque Damper Options
Want to get a engine torque damper what are my options beside the ebay ones?
Im not really looking to spend 100s of dollars on this device but would like something that would just serve its purpose =)
Is there any specially made ones for rx7s?
Im not really looking to spend 100s of dollars on this device but would like something that would just serve its purpose =)
Is there any specially made ones for rx7s?
#2
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
Search for the Garfinkle engine torque brace . Made to fit your car . Does not vibrate the cabin . It has rubber bushing built into each end . Sold out now but making more . Garfinkle oil pan braces are ready and the air pump replacement idler will be ready soon .
#3
Rotary Enthusiast
Thread Starter
Join Date: Jul 2003
Location: Toronto
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Search for the Garfinkle engine torque brace . Made to fit your car . Does not vibrate the cabin . It has rubber bushing built into each end . Sold out now but making more . Garfinkle oil pan braces are ready and the air pump replacement idler will be ready soon .
Whats the price for the torque brace?\
Is it a straight bolt on mod? or do i have to cut or move stuff?
#4
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
Yes a pulley mounted better than the others out there .Price is $ 125 in the US for the ETB about $ 10 to $20 more for Canada .IT is easy to move the ABS to drill four holes for mounting the ETB and put the ABS back in place .The job takes about 2 hours with bleeding the brakes .Do that or bolt on a junk one in 2 minutes .
#5
Senior Member
Join Date: Dec 2004
Location: The Netherlands
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
IMO the ebay one still is the best value for money.
I drilled an extra hole in the fendermount on mine to stop it from hitting the ABS unit and put a piece of rubber from a leftover intake coupler between the mount and fenderwall to reduce vibration.
Otherwise all required hardware was included and all mounting holes lined up.
They are sold on ebay as torque dampers but they are really more torque braces, the damper appears to be solid, that's probably why soo much people complain about cabinvibration.
I drilled an extra hole in the fendermount on mine to stop it from hitting the ABS unit and put a piece of rubber from a leftover intake coupler between the mount and fenderwall to reduce vibration.
Otherwise all required hardware was included and all mounting holes lined up.
They are sold on ebay as torque dampers but they are really more torque braces, the damper appears to be solid, that's probably why soo much people complain about cabinvibration.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM