engine rebuild mods
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2002
Location: FL
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
engine rebuild mods
I know about the coolant mod, they cut little fins in the coolant passages.
But what are the oil mods, how are they done, and what is the benefit. My mechanic said the only one he knows about is the eccentric shaft mod. Isn't there more? What is needed foe the eccentric shaft mod?
But what are the oil mods, how are they done, and what is the benefit. My mechanic said the only one he knows about is the eccentric shaft mod. Isn't there more? What is needed foe the eccentric shaft mod?
#2
http://www.pineappleracing.com/index...on=Custom&ID=2
scroll down a little and you will see oil mods chart.
scroll down a little and you will see oil mods chart.
#3
Full Member
iTrader: (1)
Join Date: Sep 2004
Location: NY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I would remove the thermal pellet in the E-shaft nose. Just removes one more thing to go wrong.
Check your oil pump against factory spec.
I know some people shim the oil pressure relief valve, but making more oil pressure over what's needed is just wasted HP
Check your oil pump against factory spec.
I know some people shim the oil pressure relief valve, but making more oil pressure over what's needed is just wasted HP
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM