3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Engine cranks and cranks eventually start

Thread Tools
 
Search this Thread
 
Old 09-12-05, 10:41 PM
  #1  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (36)
 
andre sinclair's Avatar
 
Join Date: Jan 2002
Location: Rx7
Posts: 3,203
Received 22 Likes on 21 Posts
Engine cranks and cranks eventually start

Hello members,

I have a 93 auto FD and recently I had a cranking problem. I replaced the leading coil after it went dead and installed a Turbo 2 with a MSD 6A. Note this cranking problem was prior to my leading coil failure.

Here `s what happens, You drive the car hard and then park, turbo time down the engine, 3 min. When you try to start the car 5 min later it just cranks, cranks and cranks. I check for spark and there `s none. As the engine cools off for about 20 min or so, you crank and it starts with no problem. This is an indication of a breaking down coil, so I replaced with another coil and the problem still persist.

Any suggestions,

Andre
Old 09-13-05, 07:59 AM
  #2  
Tequila? ..it's like beer

iTrader: (1)
 
NewbernD's Avatar
 
Join Date: Mar 2001
Location: Woodbine, MD
Posts: 1,124
Likes: 0
Received 0 Likes on 0 Posts
Hot-start problems can be attributed to low compression, leaking injectors, fouled plugs, ... just other things to think about. Have you ever checked the compression?
Old 09-13-05, 09:21 AM
  #3  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (36)
 
andre sinclair's Avatar
 
Join Date: Jan 2002
Location: Rx7
Posts: 3,203
Received 22 Likes on 21 Posts
Compression is good. 8.0 across the board...I`ve also been concern about the injectors.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
PhillyFC
General Rotary Tech Support
9
08-21-15 06:36 PM
86glxNA
New Member RX-7 Technical
7
08-18-15 03:33 PM
befarrer
2nd Generation Specific (1986-1992)
4
08-14-15 04:18 PM



Quick Reply: Engine cranks and cranks eventually start



All times are GMT -5. The time now is 04:18 PM.