I'm trying to wire my car back up and pretty much have everything I need except the blinkers. All wires going into the flasher unit is good except the power wire 12+. I guess I could just wire it to another 12v source but I want to see why there is no power before I do. Right at the flasher is where I checked power and it gets none. I also check the fuse going to it and it turned out fine. Anyone know if there is something bewteen the fuse and flasher? I would hate to tear my whole int. apart just to find one skinny *** wire

 

You checked for power at the "Hazard" fuse in the joint box, right?

Funny thing. The '95 FSM shows the wire from the hazard fuse to the flasher passing through the "X-07" connector, which is on the passenger side of the car . Seems silly to route it all the way over there and back to the flasher, but that's what I see.

Hope that helps.

 

Holy ****, you're right!! I guess I just over looked cause it does seem silly to have it route to the passenger side. Damn, that's some weird stuff!! Thanks for finding that for me Gideon

 

So, it's not a misprint, eh?

 

damn, i think i have the same problem. but i am getting power to the flasher unit but no blinky. i can hear it going tick tick tick, but no lights. i have been trying to figure this out for a year now. kvn