EGT and Water temp Readings help
08-25-01, 02:09 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2001
Location: Limassol, Cyprus
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
EGT and Water temp Readings help
I’m planning to install an EGT gauge. Can you guys tell me what temperature reading are you getting during idle and full throttle?
Also what is a “normal” water temperature that you are getting from your water temp gauge (aftermarket gauge)? I get readings little below the middle but when I turn the engine off I hear bubbles in the Air Separator Tank.
Also what is a “normal” water temperature that you are getting from your water temp gauge (aftermarket gauge)? I get readings little below the middle but when I turn the engine off I hear bubbles in the Air Separator Tank.
08-26-01, 10:03 PM
#2
Senior Member
Re: EGT and Water temp Readings help
Originally posted by Rotormania
I’m planning to install an EGT gauge. Can you guys tell me what temperature reading are you getting during idle and full throttle?
I’m planning to install an EGT gauge. Can you guys tell me what temperature reading are you getting during idle and full throttle?
650C freeway
??? full throttle though i've never seen past 650.
sensor is on downpipe near turbo
Also what is a “normal” water temperature that you are getting from your water temp gauge (aftermarket gauge)? I get readings little below the middle but when I turn the engine off I hear bubbles in the Air Separator Tank.
usually 85C-95C in city
i have a fluidyne radiator and the sensor is in the stock location.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
befarrer
Microtech
3
08-22-15 05:52 PM
