3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

ECU questions

Thread Tools
 
Search this Thread
 
Old Nov 16, 2004 | 11:10 AM
  #1  
DassRotary2427's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 445
Likes: 0
From: West Palm Beach
ECU questions

do i need to upgrade my ECU if i have a downpipe, midpipe, catback, intake, boost control (running 9 psi)? if so to what exactly? unlimited?...
Reply
Old Nov 16, 2004 | 12:28 PM
  #2  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
You should be fine IF you can keep your boost at 9 psi. An upgraded ecu will allow higher boost, at a safer level.
Reply
Old Nov 16, 2004 | 12:58 PM
  #3  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,724
From: Pensacola, FL
I'm amazed you're only getting 9psi with that setup - seems like you should be running more.

Yeah, the big advantage is being able to run a more comfortable amount of boost with the fuelling to back it up.

Good thing that you're not crankin' the boost to the sky with those mods - that's a recipe for problems with the stock ECU.

Dale
Reply
Old Nov 16, 2004 | 03:04 PM
  #4  
KaiFD3S's Avatar
SINFUL7
Tenured Member 15 Years
iTrader: (37)
 
Joined: Apr 2004
Posts: 6,574
Likes: 1
From: Alaska
yes you should be fine right now but if you do an upgrade on your IC then you should get the upgraded ECU
Reply
Old Nov 16, 2004 | 06:33 PM
  #5  
Kento's Avatar
2/4 wheel cornering fiend
Tenured Member 10 Years
 
Joined: Nov 2002
Posts: 3,090
Likes: 3
From: Pasadena, CA
It won't matter as long as he keeps his boost at 9 psi, upgraded IC or not (he listed a boost controller as one of his mods). Although creep with the intake and MP could pose problems, controller or not...
Reply
Old Dec 3, 2004 | 03:35 PM
  #6  
M104-AMG's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
iTrader: (8)
 
Joined: Oct 2004
Posts: 2,857
Likes: 6
From: FL
The only mods I've done are the following:

1) Cheap Bastard intake;
2) JDM factory downpipe;
3) Greddy/Trust Free-flow muffler;
4) N-Tech free-flow CAT
5) M2 Stage III ECU

Do I still need to install a boost controller ?

:-) neil
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
Professorpeanutrx7
New Member RX-7 Technical
5
Aug 15, 2015 01:38 PM




All times are GMT -5. The time now is 04:00 AM.