I just bought the PFC and was removing the harness from the old unit when I cut through two wires from the harness. I've taken out the ecu once before but this time she wanted to be a bitch.

Does anyone know how to remove wires that are stuck in the harness itself?

 

I'm not sure what you're asking. You have 2 cut wires, but you want to remove them? Why not just splice the wires back together?

Dale

 

Ok..heres a pic..

See the ends of the wires there? I need to re connect them but they are burried down into the harness.

I think I need to do a general tidy up of the wiring there also as the last owner had a SAFCII and now Im changing to the PFC.

 

take a small, small flat tip screwdriver " jewellers" and fron the front hold a little clip up, those plugs got a clip that hold the wire connector and pull them from behind, then soder the contact back to the wire, easy but time consuming

 

Great..thanks alot.. I''ll give it a go in the morning.