Ecu Harness Help
#1
Mi Casa Yu Casa
Thread Starter
Join Date: Feb 2004
Location: Japan Tokyo
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Ecu Harness Help
I just bought the PFC and was removing the harness from the old unit when I cut through two wires from the harness. I've taken out the ecu once before but this time she wanted to be a bitch.
Does anyone know how to remove wires that are stuck in the harness itself?
Does anyone know how to remove wires that are stuck in the harness itself?
#2
RX-7 Bad Ass
iTrader: (55)
I'm not sure what you're asking. You have 2 cut wires, but you want to remove them? Why not just splice the wires back together?
Dale
Dale
#3
Mi Casa Yu Casa
Thread Starter
Join Date: Feb 2004
Location: Japan Tokyo
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Ok..heres a pic..
See the ends of the wires there? I need to re connect them but they are burried down into the harness.
I think I need to do a general tidy up of the wiring there also as the last owner had a SAFCII and now Im changing to the PFC.
See the ends of the wires there? I need to re connect them but they are burried down into the harness.
I think I need to do a general tidy up of the wiring there also as the last owner had a SAFCII and now Im changing to the PFC.
#4
Back to the DrawingBoard.
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
take a small, small flat tip screwdriver " jewellers" and fron the front hold a little clip up, those plugs got a clip that hold the wire connector and pull them from behind, then soder the contact back to the wire, easy but time consuming
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM