the pumps are bosh and you can see the truck they were in on my website.. they come out of ford lightning or harley daidson f150 with the superchargers. the stock fuel setup worked for 835 at the wheels i saw it in person when i worked there and they do have dyno sheets. the price is under what for will sel them for and they are in my buddies supra and work great. i know they will support the power the835 was made with 8x82lb injectors at 45 psi of fuel pressure a 75shot and 25PSI of boost.


check the truck out at www.richsrotary.com click on harley truck...

the pups i can have for any one intrested... why spend the cash on a cosmo pump when you could have two time the power in the tank for only a little more.

 

Yowza! Post that dyno sheet!

 

so what exactly are you selling in the price richsrotary?

just the pumps or a complete "kit" as the other guys have mentioned??

 

RichsRotary, can you post a pic of the pumps, I wanna see how the setup looks that you're talking about, and also I'm curious about the fittment issues in the FD, thanks.

 

You guys who are putting together the dual pump kits...do you know what total GPH at a certain fuel PSI the dual pumps will support? Are your dual pump kits designed to run two fuel lines to the rails and run the rails on seperate pumps?

 

well guys some one has disabled my richsrotary account so here goes.....

the pumps come wired togeather from the factory. the pumps come plumbed togeather from the factory... the pumps on the truck were good and we were making 835RWHP.. on the dyno.. we wanted more... so now with a fully built motor not the stock motor that was in it before we set our goals higher but the pumps kept up till 835~RWHP.... i would make a kit for the rx7 for around 500bucks it would come with everything you would need to drop the pumps in but there is some cutting and you need to flare the feed line in the tank.... the pumps would fit no problem there is tons of room in that tank and in the pump holdoing assembly... i will get some pics asap.

 

I am interested to see this as well, I need enough fuel to support my single up to 24psi. I doubt I ever go any higher than that so if it can support up to 600rwhp that is good for me. Get some pics up, I have been talking to David on this now and I am interested.

Scott

 

I'd like to express some interest as well. Sounds like a great setup. Can't wait to see pics!

 

I'm expressing interest as well BUT I need to know if:

#1 Are they really Bosch pumps?

#2 Do they feed from the bottom of the tank with a screen and if they're mounted vertically?

#3 What's the MAX psi of pressure they can flow without supply problems?(VERY IMPORTANT due to me wanting to run high boost, High Pressure Bosch pumps are stable to 90psi of fuel pressure)

#4 Can we see pics?

 

1. yes

2. yes

3. we ran 27psi + shot of n20 on a t-76 turbonetics with a qtrim wheel... no problems in pressure
we replaced the pumps to a weldon setup we need more HP and more fuel....

4. if i had a digital camera i would have pics right now......

if i get some pics whos in on a group buy????

 

email me directly with any questions... its hard to type there is so much info.......... i wish i could talk on the phone to everyone.

 

I've seen this truck in person...workmanship is amazing. I had these guys do an elbow for me to connect my turbo to my IC piping. They know their ****. Just my .02 cents.
Michel

 

I'm VERY interested, I would just like to see the setup before buying, some pics would be greatly appreciated to know what I'm getting into, this is also the same type of setup that the 2003 Cobra uses also from what I hear. What's the price gonna be?

 

ME TOO ME TOO .I'm interested as well ..Rick check your PMs

Rich