Drivetrain movement...even after braces installed..
#1
Senior Member
Thread Starter
Join Date: Jun 2003
Location: west palm beach, FL
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Drivetrain movement...even after braces installed..
Well, I have a tranny brace, differential brace and poly engine mounts, and I am still getting motion through the drivetrain, Mainly when I am off the gas and i step on it the shifter moves back or forward, depending if I let off or if I get on it. Was wondering if anyone else has this problem,,maybe its the PPF? I woulda figured that no movement could possibly occur after all the bracing but it seems I am wrong. Its getting pretty bad and makes driving the car unpleasurable as it once was...
#2
Senior Member
Thread Starter
Join Date: Jun 2003
Location: west palm beach, FL
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
I replaced those as well...and even if they were bad the brace would prevent any problems from those as far as I know. Thanks for the heads up though.
#6
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
If your motor mounts are good as well as everything else . If you want to try one of my engine torque braces let me know .If it does not stop the movement with in reason,some movement is needed ,you can send it back .Check your PPF carefully .