Driver Fender Removal? How to?
#1
93 Touring
Thread Starter
Driver Fender Removal? How to?
Hit and Run has left us with a driver side door that won't open. I think if we had the fender off, we could push out the dent enough to let the door work, at least until we get it to the body shop.
Never took the fender off before and I don't see instructions in the FSM.
how hard is it to remove and does anything else have to come off first?
Thanks for any help.
Never took the fender off before and I don't see instructions in the FSM.
how hard is it to remove and does anything else have to come off first?
Thanks for any help.
#4
Junior Member
Join Date: Dec 2005
Location: washington
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
the one behind the fender is tricky to put back on, but if it is cuacked "not sure if i spelled that right" don't mess with it. you will end up paying more. other wise it should pop right off
#5
ArmitageFD3S
iTrader: (13)
As stated ^^ there are studs in the bumper that protrude into the fender. You can remove the retaining nuts, but you might have to loosen up the bumper from the radiator support in order to get enough clearance. I've never taken the fender off with the bumper still on, but it's pretty straightforward.
Thread
Thread Starter
Forum
Replies
Last Post