drive belts HELP
10-27-01, 04:11 PM
#1
Newbie
Thread Starter
Join Date: Oct 2001
Location: tennessee
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
drive belts HELP
i need to replace my drive belts on my 1993 rx7 . automatic trans, twin turbo.
they are off already and i do not know how they go back....
can someone help me with this?
maybe digital photo or two - or just instructions would be nice.
thanks private email is fine.
george
they are off already and i do not know how they go back....
can someone help me with this?
maybe digital photo or two - or just instructions would be nice.
thanks private email is fine.
george
10-27-01, 07:31 PM
#2
Constant threat
belts...
Okay -
Standing in front of the car, looking into the engine bay.
"Front" belt goes over and around power steering pump, then around A/C compressor, around the crank pulley, and then UNDERNEATH the idler/tensioner.
"Rear" belt goes over the alternator, UNDER the water pump, over the smog pump, and around the crank pulley.
Use a tension meter to get the correct tension.
Standing in front of the car, looking into the engine bay.
"Front" belt goes over and around power steering pump, then around A/C compressor, around the crank pulley, and then UNDERNEATH the idler/tensioner.
"Rear" belt goes over the alternator, UNDER the water pump, over the smog pump, and around the crank pulley.
Use a tension meter to get the correct tension.
