with the dreddy profec B electronic boost controller how high
02-24-05, 05:05 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Austin, TX
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
with the dreddy profec B electronic boost controller how high
should the low boost setting allow 12psi, 15 psi? can anyone point me in the direction if they dont know?
02-25-05, 08:27 AM
#3
3rd motors a charm I hope
Join Date: Apr 2003
Location: Central New York
Posts: 2,054
Likes: 0
Received 0 Likes
on
0 Posts
boost controllers work off the wastegate spring. Basically whether its low or high setting, you can set them where ever you want. Depending on what your wastegate spring is set to, the lowest you can go is where your spring is set to. Correct me if im wrong.
Adam
Adam
Last edited by fastcarfreak; 02-25-05 at 08:30 AM.
02-25-05, 09:42 AM
#4
Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Austin, TX
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
i have a .5 bar spring for my waste gate and the low boost dial only lets me go up to about .85 bar, thats turned all the way up. just wondering if this was normal?
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM