Where can I buy an RHD downpipe thats build for a singel turbo setup?

help please

don't shoot me, i'm new here

 

Is this for a pre-made single turbo kit or a custom kit you are putting together? If for a pre-made kit, you should be able to get a downpipe from the company that made it. If custom, then the downpipe needs to be custom

There are probably some kits for RHD in the UK, AU or Japan

 

I think it's a custom kit.

https://www.rx7club.com/3rd-generation-rx-7-1993-2002-parts-99/f-s-garrett-t66-complete-single-turbo-kit-713433/ <--- this is the kit I'm thinking of buying..

Is it possible to make an LHD downpipe fit on a RHD car?

 

Depends on whether you know someone who can reliably fab a downpipe. Might be easier to just start from scratch. Hopefully the downpipe is the only part that won't fit. Will the manifold fit?

 

HKS will work it has that strange bend in on the DP. or you could not worry about it ditch the twins and go single

 

^ ^ from his first post he does have a single turbo, that is part of the problem.

 

Are the downpipes actually different between RHD & LHD? The exhausts both run down the right hand side and afaik the engine setup is the same?

Just a question

 

the dp on rhd fd's has a section cut back so the steering shaft will pass thru, & yes u can make a lhd 1 fit but its a pain to fab it to fit