Do i use injector resistors or not?
12-03-06, 10:34 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2005
Location: Guyana/miami
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Do i use injector resistors or not?
I am going to be using Bosch 1600 top feed injectors for my secondaries. My question is do i need to use the injector reistors with this setup?
12-03-06, 10:45 PM
#2
Senior Member
iTrader: (2)
Join Date: Apr 2006
Location: Austin, TX
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Most likely, they are low impedance injectors, so yes you have to use resistors. Just use a multimeter and measure the resistance of your new injectors vs the resistance of the old injectors.
Do a search for Damian's thread about his kgparts fuel system install. There's a pretty god explanation in there.
Do a search for Damian's thread about his kgparts fuel system install. There's a pretty god explanation in there.
12-03-06, 11:25 PM
#3
Original Gangster/Rotary!
iTrader: (213)
Assuming you're running a power fc? get the 3 ohm 5 watt resistors from www.mouserelectronics.com, based on the research a good friend has done (to include talking with an apex'i engineer who developed the power fc) those are the correct ones.
12-04-06, 03:44 AM
#4
Weird Cat Man
I agree with the other two posters.
On my top feed 1600 cc/min secondaries, I use resistors.
If you want to know for sure, measure the resistance of the injector.
On my top feed 1600 cc/min secondaries, I use resistors.
If you want to know for sure, measure the resistance of the injector.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM