did my boost controller die?
#1
did my boost controller die?
one day i was at the track and my car stopped hitting 15 psi , so i raised the boost controller and no matter what the boost wouldn't pass .95 so i assumed it was a boost leak after searching everywhere and finding nothing i decided to switch wastegate springs the one in the car was .8 bar and i switched it to 1 bar spring and also disconnected the boost controller. ran manifold pressure to side port of wastegate and left top port open. now its hitting 1.30 so i happy it finally passing .95
but its overboosting so not happy about that. my question is did my solenoid die? i have the greddy profec b boost controller and tial 44mm wastegate + 3 bar map sensor. also with the boost controller disconnected does the power fc take over for boost control? thanks in advance
but its overboosting so not happy about that. my question is did my solenoid die? i have the greddy profec b boost controller and tial 44mm wastegate + 3 bar map sensor. also with the boost controller disconnected does the power fc take over for boost control? thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM