Dear RX7Club - Motor Mount Woes
09-26-10, 05:57 PM
#1
Registered Loser
Thread Starter
iTrader: (6)
Join Date: Dec 2002
Location: Whiterock
Posts: 2,224
Likes: 0
Received 0 Likes
on
0 Posts
Dear RX7Club - Motor Mount Woes
OP is a ******
I can't figure this out. my driver side mount is missing. so I bought one locally. it doesn't seem to work.
what is wrong with this picture.
I need to drop my block in this (car) by Monday night.
I can't figure this out. my driver side mount is missing. so I bought one locally. it doesn't seem to work.
what is wrong with this picture.
I need to drop my block in this (car) by Monday night.
Last edited by GoodfellaFD3S; 09-26-10 at 06:23 PM. Reason: offensive language
09-26-10, 06:20 PM
#3
Original Gangster/Rotary!
iTrader: (213)
Please keep the offensive/juvenile language off of this forum. We've all been frustrated by these cars before, but that's no excuse. The next time I see it, you'll receive a temporary ban. Thanks.
Last edited by GoodfellaFD3S; 09-26-10 at 06:22 PM.
09-26-10, 06:24 PM
#4
Here is all the help you need:
https://www.rx7club.com/3rd-generation-rx-7-1993-2002-parts-99/oem-fd3s-steel-type-motor-mounts-917686/
https://www.rx7club.com/3rd-generation-rx-7-1993-2002-parts-99/oem-fd3s-steel-type-motor-mounts-917686/
09-26-10, 07:02 PM
#6
Original Gangster/Rotary!
iTrader: (213)
The problem isn't with me, the moderating staff, or 'the FD guys.'
The problem is with what you posted----- rascist, anti-semitic, and/or homophobic posts have never been looked upon favorably. I don't see how you could have possibly thought that was ok to post.
Trending Topics
09-27-10, 02:44 PM
#8
Don't try and turn this around.
The problem isn't with me, the moderating staff, or 'the FD guys.'
The problem is with what you posted----- rascist, anti-semitic, and/or homophobic posts have never been looked upon favorably. I don't see how you could have possibly thought that was ok to post.
The problem isn't with me, the moderating staff, or 'the FD guys.'
The problem is with what you posted----- rascist, anti-semitic, and/or homophobic posts have never been looked upon favorably. I don't see how you could have possibly thought that was ok to post.
I think the 'care to explain' was aimed at Karak and his info on the Steel/Aluminum mounts.
-M
09-28-10, 02:09 AM
#9
Rotary Enthusiast
iTrader: (4)
Join Date: Jun 2007
Location: California
Posts: 1,114
Likes: 0
Received 0 Likes
on
0 Posts
I ran into this same problem when installing aftermarket motor mounts. I dont remember which side is which, but some FD's have a steel motor mount for one side, and use aluminum mounts for the other side. The aluminum mounts, do not have a hole in the middle to install aftermarket mounts, where as the OEM steel mounts do.
Many FD owners have gotten rid of the aluminum mount and installed a steel mount on both sides being that they are interchangeable. If you are installing aftermarket motor mounts, you need to have a steel OEM bracket on both the drivers passengers side for it to work.
I hope that made sense
Many FD owners have gotten rid of the aluminum mount and installed a steel mount on both sides being that they are interchangeable. If you are installing aftermarket motor mounts, you need to have a steel OEM bracket on both the drivers passengers side for it to work.
I hope that made sense
