custom build exaust questions and header wrap
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: greece
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
custom build exaust questions and header wrap
hi ,
i am installing a kit from a-spec that came with stainless steel manifold and downpipe.
i will need to fabricate my own the mid section that the cat sits . my question is :
1)should i use any gaskets between the flanges or not?
please note that all the pieses will be stainless steel and i will cut flanges and weld these to the pipes.
2) do anyone have experiance with DEI titanium header wrap?
i am thinking to use it for downpipe and manifold wraping.
other othion is the thermotec wrap that needs a silicon paint-protective on it.
thanks,
i apreciate any help!
Achilles
i am installing a kit from a-spec that came with stainless steel manifold and downpipe.
i will need to fabricate my own the mid section that the cat sits . my question is :
1)should i use any gaskets between the flanges or not?
please note that all the pieses will be stainless steel and i will cut flanges and weld these to the pipes.
2) do anyone have experiance with DEI titanium header wrap?
i am thinking to use it for downpipe and manifold wraping.
other othion is the thermotec wrap that needs a silicon paint-protective on it.
thanks,
i apreciate any help!
Achilles
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM