3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Crank no start condition (searched)

Thread Tools
 
Search this Thread
 
Old May 24, 2015 | 09:10 PM
  #1  
adamant2686's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2011
Posts: 7
Likes: 0
From: Michigan
Crank no start condition (searched)

Hey guys I have tried searching for possible remedies. My car will crank just fine, but the fuel pump is not priming nor is the cluster lighting up when the key is turned forward. I have provided a quick brief summary at the bottom for those that would wish to not read the entire post.

I'm trying to be as detailed as possible in an attempt to leave clues to the problem. I suspect the problem to be near the steering wheel with the ignition switch area? The car was running then parked. I attempted to tuck up the wiring underneath the steering wheel and after this condition happened. Within 20 minutes or so.

I have attempted to tried jumping the fuel pump through the diagnostic box without luck as well as jumping the fuel pump relay. Also the cabin overhead lights and windows work. The headlights pop up, but do not illuminate.


I was just curious as to what could have caused the car to crank fine but not allow the cluster to turn on or the fuel pump to prime?

Summary:
-crank, but no start.
-fuel pump not priming
-gauges not illuminating
-cabin lights and windows functional
-no headlights
- no action when key is turned to "acc" despite cranking fine.
-suspect problem under steering wheel (ignition wires?)

Any help would be greatly appreciated. Thanks
Reply
Old May 25, 2015 | 02:24 AM
  #2  
adamant2686's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2011
Posts: 7
Likes: 0
From: Michigan
Well after extensive searching, I found a thread similar to mine which indicated it might be the main fuse (120A). I will try this tomorrow.
Reply
Old Jun 20, 2015 | 06:05 PM
  #3  
mjc1055's Avatar
Full Member
iTrader: (1)
 
Joined: May 2015
Posts: 71
Likes: 0
From: Tucson, AZ
Are there any updates on this? Sounds exactly like a problem I'm experiencing now... but of course this thread wouldn't have a resolution, hah.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
PhillyFC
General Rotary Tech Support
9
Aug 21, 2015 06:36 PM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 07:40 AM.