cracked manifold
Thread Starter
Old School Member
Joined: Feb 2001
Posts: 640
Likes: 0
From: Vancouver, Wa, USA
cracked manifold
i pulled my turbos today and recigized some crack on the turbo manifold where it bolts to the block. does it need to be replaced or will it be ok, its on the top on the right side and on the bottom on the right side, they go all the way through, it not just cracked on the surface.
thanks
thanks
Last edited by cash money; Aug 12, 2002 at 07:27 PM.
Passenger
Posts: n/a
Well if the gasket will seal then you are O.K. I also had some large cracks on a old set of turbos but I used some acousty seal and the new gasket ans she sealed great. I would hane to get a better (close up) pic of the cracks to give a better answer. I since have upgraded to a better set of turbos
-Rikki
-Rikki
Photo Diety
Joined: Mar 2001
Posts: 2,311
Likes: 0
From: Florida
EVERY stock exhaust manifold does this...I have several on mine as well including around the wastegate door. A really poor design that's inexcusable. Mine seems to be holding up just fine but I'll be very glad when I can finally pull the twins off and slap on a single.
michel
michel
Thread
Thread Starter
Forum
Replies
Last Post
Clacor
Single Turbo RX-7's
19
Sep 11, 2015 08:36 PM
