3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

cracked em?

Thread Tools
 
Search this Thread
 
Old Oct 11, 2006 | 01:21 PM
  #1  
Wilberforce's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Manchester
cracked em?

just bought a non running 93 fd

got it running, sounds like a tractor and the engine compartment is full of fumes,

havent found the source of the leak yet but is a crack in the manifold the probable cause?

cheers
will
Reply
Old Oct 11, 2006 | 01:26 PM
  #2  
burnoutking999's Avatar
Mentos and Magnums
Tenured Member 15 Years
 
Joined: Apr 2005
Posts: 3,373
Likes: 0
From: FLROIDUH
Originally Posted by Wilberforce
just bought a non running 93 fd

got it running, sounds like a tractor and the engine compartment is full of fumes,

havent found the source of the leak yet but is a crack in the manifold the probable cause?

cheers
will
A little more info is good... External exhaust leak or just the sound and a weird lope? external leaks are usually ok easy to locate if nothings bad(gaskets/manifolds) then a stuck corner seal?
Reply
Old Oct 11, 2006 | 01:41 PM
  #3  
Wilberforce's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Manchester
def leaking, think oil metering pump has a fault on it so dosent run very well either,

basicly what has happened is

car has been imported from japan so has been sat on a boat for 3months

then it has been sat in a yard for 4 months

a bloke buys is not really knowing much about them and thinks the rotors gone on it so starts to take it apart. He describes the fault as no power, and back fires when rev'ed which to me sounds like its in a safe mode due to something such as low oil metering pump pressure

i buy if off the bloke half stripped

put it back together and it sounds like the manifold isnt even connected, (ive checked it is)

heard a while ago manifolds are prone to cracking will strip down again this weekend.

car is standard by the way
Reply
Old Oct 11, 2006 | 01:42 PM
  #4  
Wilberforce's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 28
Likes: 0
From: Manchester
how do you diagnose a stuck corner seal?
Reply
Old Oct 11, 2006 | 03:23 PM
  #5  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,804
Likes: 646
From: FL-->NJ/NYC again!
If the oil metering pump is bad, this will cause the car to go into limp mode.
Reply




All times are GMT -5. The time now is 08:46 AM.