Couple of Questions about Going Single
#1
Wouldn't Go If U Paid Me
Thread Starter
Join Date: Nov 2003
Location: Clayton, NC
Posts: 3,036
Likes: 0
Received 0 Likes
on
0 Posts
Couple of Questions about Going Single
I have three fairly simple (read newbie) questions about single setups:
1)I know more or less how much vacuum hose I need to order for a full silicone hose jobe on a sequential setup. I know for a single setup I will need a lot less of the 3mm hose. Does anyone have a ballpark figure as to how much I should order?
2)I bought the setup used and do not have a diagram as to what goes where (ie oil return lines, vacuum lines, etc)
3)What solenoids/sensors can be removed with a single setup? (I am going to do a search for this one after I post this thread, but if anyone has the info off top I would be grateful for the help)
Thanks in advance for the help.
-Josh
1)I know more or less how much vacuum hose I need to order for a full silicone hose jobe on a sequential setup. I know for a single setup I will need a lot less of the 3mm hose. Does anyone have a ballpark figure as to how much I should order?
2)I bought the setup used and do not have a diagram as to what goes where (ie oil return lines, vacuum lines, etc)
3)What solenoids/sensors can be removed with a single setup? (I am going to do a search for this one after I post this thread, but if anyone has the info off top I would be grateful for the help)
Thanks in advance for the help.
-Josh
#2
#3
Wouldn't Go If U Paid Me
Thread Starter
Join Date: Nov 2003
Location: Clayton, NC
Posts: 3,036
Likes: 0
Received 0 Likes
on
0 Posts
Rhode Dog that helps a lot. Thanks.
I also think I got the answer to my question about the vacuum lines. looks like 15-20ft will do the trick.
I also think I got the answer to my question about the vacuum lines. looks like 15-20ft will do the trick.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM