Cosmos Twins on FD..Possible?
#1
Full Member
Thread Starter
Join Date: Dec 2001
Location: Atlanta, GA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Cosmos Twins on FD..Possible?
I have been thinking of numerous ways to upgrade my stock twins. I might have a way to get a hold of a set of Cosmos twins.
Anybody have this set up running on their FD? I'll probably get the manifold with it too.
I was wondering if anyone knows if (Example A) I can just take my stock manifold and twins off and then replace it with the Cosmos set. I think I might have to get a custom downpipe fabricated if I do it that way....or (Example B) could I leave the manifold and swap out the turbos instead?
Right now, my setup is pretty basic....Intake/DP/Catback. Do I need to upgrade my ECU first before I can do this? Positively and absolutely later on I will also be adding an Efini Y-Pipe so I'd end up with a Power FC then.
I'm trying to figure out what I can do before I upgrade my ECU.
Thanks,
Jason
Anybody have this set up running on their FD? I'll probably get the manifold with it too.
I was wondering if anyone knows if (Example A) I can just take my stock manifold and twins off and then replace it with the Cosmos set. I think I might have to get a custom downpipe fabricated if I do it that way....or (Example B) could I leave the manifold and swap out the turbos instead?
Right now, my setup is pretty basic....Intake/DP/Catback. Do I need to upgrade my ECU first before I can do this? Positively and absolutely later on I will also be adding an Efini Y-Pipe so I'd end up with a Power FC then.
I'm trying to figure out what I can do before I upgrade my ECU.
Thanks,
Jason
#2
Senior Member
Join Date: Mar 2001
Location: Roaring Spring, PA USA
Posts: 524
Likes: 0
Received 2 Likes
on
2 Posts
Jason
If I am not mistaken, Cosmo 13B-RE twins are smaller than stock FD twins. The reason is to spool up quicker since they are all automatic tranny vehicles. Cosmo 20B twins, I am not sure about. They may be larger, but not sure. Again, they are all automatics. They are not sequential (I think) also.
As I recall, The hitachi 12 somethng is on the FD and the Hitachi 10 something for the Cosmo compressors. Not sure exactly what the flow or stuff is. I just recall reading this. I did read that they do bolt up the same though.
Can anyone else verify this?
Tim McCreary
If I am not mistaken, Cosmo 13B-RE twins are smaller than stock FD twins. The reason is to spool up quicker since they are all automatic tranny vehicles. Cosmo 20B twins, I am not sure about. They may be larger, but not sure. Again, they are all automatics. They are not sequential (I think) also.
As I recall, The hitachi 12 somethng is on the FD and the Hitachi 10 something for the Cosmo compressors. Not sure exactly what the flow or stuff is. I just recall reading this. I did read that they do bolt up the same though.
Can anyone else verify this?
Tim McCreary
#3
OG
Tim you are not mistaken....cosmo twins would be a downgrade..cosmo 20b twins...still a downgrade.
Jason you are better off getting the 99 spec turbo...only about $3k
Jason you are better off getting the 99 spec turbo...only about $3k