LalitosRx-7

hey guys im in the process of replacing all (14) cooling hoses on my fd. ive replaced most of them but four. ive inclueded pictures of three of the hoses that im not sure of their location. the fourth one attaches to the side of the TB and needed to know how to replace that one does the uim need to come off??
thanks again!!

CarbonR1

iTrader: (2)

I changed my TB coolant line without removing the UIM. I took off the throttle body and that allowed enough room from the driver's side, even though it was a pita it worked.

GoodfellaFD3S

iTrader: (213)

The three hoses you have pictured look to be heater hoses, the first two on the passenger side of the engine bay and the third on the driver's side.

I always replace them on customer's cars when the motor is out of the car, definitely makes it easier. The one you'll have the most trouble with (motor in car) is the second one pictured.

Use a razor blade to slit the old hoses at the end (slit perpendicular to the hose), then a flatblade screwdriver to pry it apart to remove.

hope this helps!