3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Coolant Seal Fix

Thread Tools
 
Search this Thread
 
Old Sep 8, 2005 | 08:13 PM
  #1  
boosted94's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2002
Posts: 344
Likes: 0
From: c
Question Coolant Seal Fix

I did the CRC block weld fix, but how can I tell if it worked. The reason I ask is because I didn't have most of the symptoms others had. ie. white smoke, coolant leaking from overflow reservior. The only thing I had was cold and hot starting along with the water rushing sound from inside the passenger compartment. The car starts fine now in the mornings and when hot, but its been doing that since I went to straight water for the block weld fix. I'm I going to have to flush out the CRC and add antifreeze to see if I get the sweet smell again. Also, I am still getting the water rushing but only when cold.
Reply
Old Sep 9, 2005 | 06:37 AM
  #2  
CantGoStraight's Avatar
What's your point ?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 3,573
Likes: 0
From: Gainesville, Fla.
you still have air in the system if your hearing the water rushing sound in the heater core, which you shouldn't hear if the heat isn't on.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM




All times are GMT -5. The time now is 11:04 AM.