Coolant Hose Replacement Help!
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2005
Location: Hamilton, Ontario, Canada
Posts: 655
Received 0 Likes
on
0 Posts
Coolant Hose Replacement Help!
Hi boys.
This forum has made me paranoid with my FD, but at the same time, I think it has saved me from disaster.
The paranoia has consisted of extremely frequent checks to the oil and even more, to the coolant level. Thanks to this, I realized that I was loosing coolant pretty quickly.
No problems with starts, no smell of coolant out of the exhaust, no more than the usual 1 minute of smoke on cold starts.
I thought it might be a hose. It turns out, it was.
Here's the question: the hose that is located under the throttle body, makes a 90 degree turn downwards and hooks up to something else has a pinhole.
Can anybody tell me what type of hose it is and where/if I can get one to change it? I am going to take it out, but I was wondering if anyone here can direct me the right way. I'd rather pick one up and install it instead of ordering and waiting a couple of days.
Let me know and thank you,
Giovanni
This forum has made me paranoid with my FD, but at the same time, I think it has saved me from disaster.
The paranoia has consisted of extremely frequent checks to the oil and even more, to the coolant level. Thanks to this, I realized that I was loosing coolant pretty quickly.
No problems with starts, no smell of coolant out of the exhaust, no more than the usual 1 minute of smoke on cold starts.
I thought it might be a hose. It turns out, it was.
Here's the question: the hose that is located under the throttle body, makes a 90 degree turn downwards and hooks up to something else has a pinhole.
Can anybody tell me what type of hose it is and where/if I can get one to change it? I am going to take it out, but I was wondering if anyone here can direct me the right way. I'd rather pick one up and install it instead of ordering and waiting a couple of days.
Let me know and thank you,
Giovanni
#2
Rotary Enthusiast
iTrader: (25)
http://www.autosportracetech.com/RX-7/coolingsystem.htm
I'm sure any hose that you can find in the same diameter will work.
If you want to order an OEM Mazda part, check out this thread.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/all-coolant-hose-part-numbers-331644/
I'm sure any hose that you can find in the same diameter will work.
If you want to order an OEM Mazda part, check out this thread.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/all-coolant-hose-part-numbers-331644/
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM