COM/NO is IN/OUT?? ProfecBII question
11-17-06, 04:35 AM
#1
quiet excess...
Thread Starter
Join Date: Aug 2006
Location: NoVA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
COM/NO is IN/OUT?? ProfecBII question
I've just installed my DP and at the same time my Boost Controller... except for the final T connectors and reassembly... My question is; which is the IN and OUT nipples on the valve unit when translated from the COM/NO language???
All the write ups I've read and all the threads I've seen this morning mention IN/OUT in their diagrams for the COM/NO/NC ports on the Greddy ProfecBII.
I realize its not the NC port as it is stock WG. I followed the write up by forum member... and the manual seems to be written in ??? Japanese ?!@#?
sheesh...
All the write ups I've read and all the threads I've seen this morning mention IN/OUT in their diagrams for the COM/NO/NC ports on the Greddy ProfecBII.
I realize its not the NC port as it is stock WG. I followed the write up by forum member... and the manual seems to be written in ??? Japanese ?!@#?
sheesh...
11-17-06, 05:02 AM
#2
quiet excess...
Thread Starter
Join Date: Aug 2006
Location: NoVA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I think I muddled through the language in the manual and got it right now... two top "turbo" hoses, hose into the NO nipple then exit through the COM to the Wastegate... do I have it right?
<--- works midnight shift 4/10's. ZZZZZZZZZZzzzzzzzzzz
<--- works midnight shift 4/10's. ZZZZZZZZZZzzzzzzzzzz
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM