Does anybody know what size fittings the clutch master and slave require? I need to have a longer clutch line made for my project car.

 

I measured the fitting on the master and slave last night. I believe they are both 10mm x 1. I recommend double checking before buying any parts because I used a micrometer to measure it and accurate to +/- 1mm at best.

 

I need to build some custom lines too for Cosmo AT > 5 speed swap.
10mm 1.5?

 

M10 X 1.0mm

Hard lines use a double-flare.

The BEST hard-lines, even better than stainless, and used by Porsche, Aston-Martin, Volvo, etc.:

http://www.fedhillusa.com/

:-) neil

 

thanks. those hard lines looks great!