Changing Brake Lights
Thread Starter
The Hammer of Thor
Joined: May 2001
Posts: 75
Likes: 0
From: Coppell, TX
Changing Brake Lights
All -
How the heck do you change the brake light bulbs? Could you please relay some step-by-step instructions?
Yeesh. This has to be a lame question, but I'm stuck.
Thanks in advance,
Chris.
How the heck do you change the brake light bulbs? Could you please relay some step-by-step instructions?
Yeesh. This has to be a lame question, but I'm stuck.
Thanks in advance,
Chris.
The Power of 1.3
Joined: Aug 2001
Posts: 2,835
Likes: 0
From: Shrewsbury, Massachusetts
It's actually quite easy.
Good enough?
- Pop the hatch
- Remove the three phillips head screws that cover the metal just in front of the tail lights
- slide the tail light out to the side of the car (this might take a bit of force, but just pull, it'll come off)
- rotate each of the three bulb holders counter-clockwise about 1/4 turn and pull out
- replace the bulb
- assembly is the opposite of dissassembly
Good enough?
Glug Glug Glug Burp
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
Originally posted by 911GT2
It's actually quite easy.
Good enough?
It's actually quite easy.
- Pop the hatch
- Remove the three phillips head screws that cover the metal just in front of the tail lights
- slide the tail light out to the side of the car (this might take a bit of force, but just pull, it'll come off)
- rotate each of the three bulb holders counter-clockwise about 1/4 turn and pull out
- replace the bulb
- assembly is the opposite of dissassembly
Good enough?
Thread Starter
The Hammer of Thor
Joined: May 2001
Posts: 75
Likes: 0
From: Coppell, TX
All - Worked as painstakingly detailed out for me. Thanks. I was suprised that the entire light assembly structure came out; I was thinking a portion of it did before your instructions.
Chris.
Chris.
Thread
Thread Starter
Forum
Replies
Last Post
fastsaab
New Member RX-7 Technical
5
Aug 19, 2015 11:42 AM