CF Seibon Scoot hood clear Greddy SMIC?
#4
Don't worry be happy...
iTrader: (1)
Originally Posted by tphan
Would it fit?
TIA
TIA
I have a seibon scoot with a PFS SMIC with an M2 intake and it also fits just fine.
One thing to know before you purchase: The seibon "gills" and "duct" are less agressive than other scoot replica manufacturers, which for me was a good thing. It also comes with a mesh installed already.
#5
Senior Member
Join Date: Jul 2005
Location: Clearwater, FL
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
I have the VIS version and it doesn't come close to hitting anything under the hood other than the hood support rod. On the VIS the center is raised slightly higher than stock. Just keep in mind they (Seibon or VIS) don't come with a center channel.
On the upside my engine temp is in check even in parking lot traffic. A major plus. The down side is that without the rain guards my battery gets soaked in the rain.
On the upside my engine temp is in check even in parking lot traffic. A major plus. The down side is that without the rain guards my battery gets soaked in the rain.
#6
Rotary Enthusiast
Thread Starter
Originally Posted by FLA94FD
I have the VIS version and it doesn't come close to hitting anything under the hood other than the hood support rod. On the VIS the center is raised slightly higher than stock. Just keep in mind they (Seibon or VIS) don't come with a center channel.
On the upside my engine temp is in check even in parking lot traffic. A major plus. The down side is that without the rain guards my battery gets soaked in the rain.
On the upside my engine temp is in check even in parking lot traffic. A major plus. The down side is that without the rain guards my battery gets soaked in the rain.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM