kris

I have a touring, the middle switch in the center is a blank. I was just wondering what that switch is for and what my car doesnt have..

Mahjik

iTrader: (1)

Canadian cars required headlamp washers (I beleive). That's where the switch would be located for those vehicles.

djantlive

That's the ejection button

No, seriously, Mahjik is right. It's for headlight washer for some non US model.

maxpesce

Correct - Canada requires Daytime Running Lights (or Headlighs on), so Canadian models were equiped w/ headlight washers and the switch gets mounted in that position. The other interesting thing about it is that when the Headlight washer is installed ALL the Washer Fluid is stored in the rear tank including for the Front windshield washers, eliminating the tank under the drivers headlight

jspecracer7

That's the space for my push start ignition

Mahjik

iTrader: (1)

That's the space for my currently non-working fan mod switch.

Brede

And since we don't have the under-bonnet tank, we can get a US-spec one and use it for IC-spray!

m_snoby

Bizarre and interesting ... Both at the same time!, hum you learn something new everyday.
matt

bluesman!

I thought that was where the on/off switch went for the optional intake tornado device! Oh sorry, That's another thread!

RX Steve

NOS safet switch