93Efini

why are some of you so impatient? give him a few days to figure out prices...not everyone goes to this site EVERY single day...

XxMerlinxX

iTrader: (2)

It won't be in the thousands, I can at least tell you that. I can't, however, give you a price without 1. Talking to Tim about it and 2. Seeing how many people are behind this. I can tell you that it'll be as low as possible as I'm putting together GB's for my R6 forum for c/f windshield's, shark guards, and race fairings.

ROTORhead93

Wait, i thought we were gonna see if Paulo (Fazzt73) would do the c/f work for us?

sonix7

? no response yet. I don't give an "f" who does it, as long as it looks as good as the photos and its reasonably priced for the whole kit. Like was stated before under $400 is about what it should cost, the lower the better, that's why dude is trying to do a group buy. I am not playing favorites here, whoever can do this quality of work at the price range we are talking, I am very interested and am one of the first people on the list. This doesn't seem to be going anywhere though. So what is up?

93Efini

if you don't give a **** what it looks like and want it dirt cheap and quick, then maybe you should go with XxMerlinxX's group buy....

I actually want quality and i'm willing to pay the cost...im sure other people here agree with me

ROTORhead93

^^ wat he said

XxMerlinxX

iTrader: (2)

Wtf? Who the **** are you to say what their work is like? You've never even seen any of their work before, but you're already thrashing it like it's made by APC or something? This isn't some mom and pop, do it in their back yard crap that has already been posted. I'll get pics up as soon as I can of some of their parts, but you're completely unjustified in bashing something that you've never even seen before.

4CN Air

iTrader: (7)

CF makes people crazy

93Efini

WTF? who are you to come on this thread and start bitching, and trying to get everyone to buy from someone you know in Atlanta...

besides, you'll probably end up flaking on buying anyway...just like with the HKS BOV...

XxMerlinxX PM's me saying he'll pay me $130 shipped for a HKS BOV i was selling, a few hours later i talk to him on AIM, and agree to the price, then all a sudden he can't afford it, saying his car is at mazda getting worked on...yada yada, what a bunch of bullshit....i guess your car wasn't at mazda a few hours ago when you PM'd me about buying the BOV...YOU'RE A FLAKER WHO WASTES PEOPLE TIME!!!

hows this...keep your bullshit to the new thread you started, and people who want professional CF work done can post here and be patient...

potatochobit

iTrader: (1)

i think you all need prune juice.


anyway, 400-600$ is an average price for good quality, i know because i have been keeping tabs on the prices for a few years now. and its not about being impatient, its about order of process.

XxMerlinxX

iTrader: (2)

You need to chill out man, seriously. Yeah, I changed my mind on the BOV cause I thought better of it. I decided I probably needed to hold off until I knew the extent of the repairs. So what? I'm allowed to change my mind. And what do you care if it comes from the guy I know in Atlanta or the guy in Cali? Unless you're making something on the side with the other one, I don't see why you'd care? You have no idea who you're even talking to or about and you think that because... I don't even know your reason for thinking this, but for whatever reason the stuff I'll be putting together for us is crap? Whatever, use some common sense and just calm down or something. I'm not affiliated with this guy at all, I just want us to get good quality items at a good price. I know Tim will cut us a fair deal, which is why I posted in the first place. Like I said in my other "bullshit new thread", I'll have pics to represent the quality of the work early monday, hopefully along with some prices. If you don't like it, go ahead and get your stuff from the guy in cali.

93Efini

what doesn't make sence is why you posted on this thread trying to get everyone to buy from someone else all a sudden, then you bitch about how there aren't prices posted yet...and now...you have 2 threads you started just to sell everyone on the idea to buy from someone you know...people will buy from who they want, so i really don't give a **** what you say. make another thread for all i care...then you'll have 3! yeah!!!

And next time before you make an offer on a part though a PM, commit to actually buying it! don't waste others time and back out of an offer you made...but hey, its not your fault, your new here and using common sence is not required..

sonix7

woah, there bro!! I was saying I don't give a **** who does the work as long as it's AS GOOD AS THE QUALITY IN THESE PICTURES IN THE THREAD. I know you got your **** done by fazzt73. ******* great!! He posted like a week ago and said nothing else about it. I PM"D him, no response. Why are you pushing this if he ain't doing it? Someone that can ACTUALLY DO THE CARBON FIBER WORK speak up and show us the quality, not homeboy getting offended cause he didn't understand my post. What do I care who does it as long as I get the quality and price. COMPRENDAY!! got to caps lock this **** for you guys to understand. Now we will wait and see.

XxMerlinxX

iTrader: (2)

Can't you just quit being a baby and shut the **** up? I wasted how much of your time, like 10 seconds reading a PM? Unless you're one of those hooked on phonics kids that can't read, then I could possibly see getting angry about wasting a half hour of your life trying to read something that you can barely comprehend. Such as I never bitched about there being no prices posted. I bet the only reason you're bitching about this whole deal is because he's gonna cut you a deal on the rest of the pieces. In any case, just shut your mouth unless you have something constructive to say. Oh, and I'd go get my money back if I were you, apparently those reading lessons didn't take.

93Efini

you are the stupidest ************ on this forum XxMerlinxX...
IVE ALREADY PROVED YOU'RE A FLAKER ON BUYING!!! AND SUCH A BULLSHITTER!
I don't care how cheap your CF deal from altanta will be, If you're recommending it i doubt it will be good.

I could care less who you buy carbon fiber from...your the one pushing everyone to buy from your friend in atlanta...not to mention you keep posting on this thread time after time.

Its unbelievable how a stupid punk like you, starts talking all this ****, you've been on this site for less than 2 weeks!

XxMerlinxX

iTrader: (2)

And you've been on here for 4 months, what's your point? Or I should've figured out by now, you don't really have many points with your posts. How have you proven I'm a bullshitter? I changed my mind because I don't want to come up short for parts on my car which NEED to be on there. Unlike your shitty little BOV that looks like it got pulled off of some junked FD that I don't really need. If you could care less (which should be "couldn't" you illiterate moron, "could" means that you care), then why can't you just shut your mouth until something solid is posted? What are you basing you claims on? Have you seen his work? No, so keep your unsupported claims to yourself.

respecttheseven

thanx for bringing high school type drama into a great CF thread. can u guys take it outside?!

Chaosx1

So...where's the carbon fiber?

KevinW

iTrader: (1)

i want some too^^

fazzt73

iTrader: (8)

Ja..ja..Ja...!!! im certanly here working on a price for you guys just been lately..
Paulo.

fazzt73

iTrader: (8)

Wow i just went trough the hole deal incredible.
First XxMerlinxX dont jack this thread thats ******* rude!
you dont get a lot of free time doing this **** for a living so
be patient, this is no mom and pop gig..so dont asume that.
now before i give you guys prices let me tell you this..
the parts are overlayed stock ones the back of the parts are very complex
so if somebody can mold them and make them fit OEM ill eat 'em.
if you agree with my terms ill gladly make the parts ONE PROJECT AT A TIME!!
this is true custom work so a group buy makes no sense.
now back to topic:

gauge cluster 200.00 front and back
a/c panel 125.00
shift panel 125.00
ashtray 85.00
arm rests 250.00 both sides

you have to send the parts to my address in Cali.
and ill pay for the shipping back, takes 3-4 weeks to get the parts back

the prices are for the parts pictured on this thread any more inquires on prices
and availability shoot me an email at fazzt73@yahoo.com.

Chaosx1

Yay! I've been waiting for this! I live in California also, so is it possible to just drop off the parts and pick them up when they're done to save on shipping costs?

fazzt73

iTrader: (8)

Sure in im Chula Vista, come over to drop the parts whenever your ready..
Paulo.

sonix7

Alright, Fazzt73 nice to see you got back with us. I for one have to say that the prices are a little high. I have already got a quote from a guy that has been doing this for some time and his stuff sells through e-bay and can be reached personnally, his work is extremely high quality and these are the prices he quoted me.
door sills 125$
center console and ashtray 140$
outside door handles, new lowered price 130$
inside door handles 170$
R1 front lip 200$
all 4 inner triangles 40$
99 spec wing, center and end caps only 250$
gauge cluster and top 150$
a/c panel no din 75$
steering column top and bottom 70$
headlight surround 75$
windshield pillars 150$

I am sorry man, but these are much better prices than what you gave us. I for one am not paying almost $900.00 plus shipping to do the dash and doors. I have already wasted 350.00 on the torasport kit. Economy is not that good. No offense, has nothing to do with you or your work, just better offer.

sonix7

I want everyone to know, I am not trying to highjack any threads, I just want him to know that the prices have to come down or else I am not interested. I have not recently talked with the guy that gave me those prices. I don't know if he is still at it. I am in the process of contacting him now. These quotes are what he gave to me. This is supposedly what he charges. If he is interested in doing anything for other forum members, I will tell him to post a thread on it. I am just trying to get the most reasonable prices for the same quality work. That's how the world works. Sorry, Business is never personal.