Carbon fiber interior peices.
1 Attachment(s)
Where can you find carbon fiber inserts/interior peices like this.
https://www.rx7club.com/attachment.p...hmentid=118207 It looks soooo fucking clean!! |
Check out the Torasport full carbon fiber kit. I love mine. Not sure on the pricing though.
http://www.torasport.com/Dashkits/mazda.htm |
Sweet. Got any pics of your interior with it installed?
|
1 Attachment(s)
My custom made pillar with HKS guages on top & center Autometer shiftlight
& RE-Amamiya white face 320km. speed meter :D |
what is the little blue button on the steering wheel? never noticed one before... any clues?
|
Originally Posted by xblex
My custom made pillar with HKS guages on top & center Autometer shiftlight
& RE-Amamiya white face 320km. speed meter :D |
Originally Posted by marix1521
what is the little blue button on the steering wheel? never noticed one before... any clues?
i think it's a NARDI logo :) |
Originally Posted by RCCAZ 1
Check out the Torasport full carbon fiber kit. I love mine. Not sure on the pricing though.
http://www.torasport.com/Dashkits/mazda.htm those overlays are nice but they don't go edge to edge. Mark Koch was the only one doing it but has stopped doing the overlays for awhile. his website is: http://www.carbonfiberparts.net/ click on customer gallery to see his work or search for my name (7racer) in the rx7forum for pics of my interior. Someone else in the interior/exterior subforum posted in mark's original thread and stated he could do the same overlay. The only thing is he hasn't yet posted any pictures of his work. https://www.rx7club.com/forum/showth...t=carbon+fiber good luck! |
Those parts are actually Mazdaspeed parts. The shift knob, the handbrake, the dash panel, and switch panel. You can get 'em from here: http://www.japanparts.com/shop/shop....ior+%2d+others but I've never dealt w/ them personally, plus their prices are a lil high. I'd hit up Chuck @ RE, and have him get the parts for ya. Prob is, some parts on that website are now discontinued...
|
overlays
4 Attachment(s)
Originally Posted by 7racer
those overlays are nice but they don't go edge to edge.
Mark Koch was the only one doing it but has stopped doing the overlays for awhile. his website is: http://www.carbonfiberparts.net/ click on customer gallery to see his work or search for my name (7racer) in the rx7forum for pics of my interior. Someone else in the interior/exterior subforum posted in mark's original thread and stated he could do the same overlay. The only thing is he hasn't yet posted any pictures of his work. https://www.rx7club.com/forum/showth...t=carbon+fiber good luck! here you go... i just did a front lip and a rear bumper panel for somebody in the forum i wish i he would post. Paulo. |
PM'd you fazzt73
|
|
all the Mazdaspeed cf replacements (not overlays) are for JDM cars (re: RHD). I have yet to find replacement parts for the USDM FD's, and I have been searching for years. Mark made em a while back, but he has moved on. He made an exellent product too :(
|
I would rather doubt that even the Mazdaspeed versions were anything more than an overlay. Molding CF into those complex shapes on the back would be god awfully expensive. They were/are probably basically what Mark K. was producing... a thin layer of CF on top of a molded plasic piece.
There's really nothing wrong with that... its just for looks anyway. It's not like you'd be saving any weight over the molder plastic parts, and they aren't load brearing. The only thing you DON'T want IMO are those stick-on decal kits that don't even cover the whole part... |
Originally Posted by ptrhahn
The only thing you DON'T want IMO are those stick-on decal kits that don't even cover the whole part... Mark at least covered up all the plastic (as much as humanly possible) :) |
Originally Posted by RedR1
Agreed. Not trying to put anyone out of place if they have one, but it looks odd when you are taking in the sight of the carbon, only to see it lump off, and the plastic is exposed for about a half inch.
Mark at least covered up all the plastic (as much as humanly possible) :) |
so rosrex7 where did you get yours from?
can you post a link to the place you bought it from or info please. |
I like the Carbon Fiber look... Looks high tech and up to date... There is an other thread around here floating around with pics of a 350z done up nicely in CF......
|
i before e except after c or sounding like "a" in neighbor and weight
"pieces" sorry, i had to |
so anyone with the tora sport kit can you please post pics of your kit installed in your 7.
please Thomas |
Originally Posted by FDNewbie
Those parts are actually Mazdaspeed parts. The shift knob, the handbrake, the dash panel, and switch panel. You can get 'em from here: http://www.japanparts.com/shop/shop....ior+%2d+others but I've never dealt w/ them personally, plus their prices are a lil high. I'd hit up Chuck @ RE, and have him get the parts for ya. Prob is, some parts on that website are now discontinued...
|
Originally Posted by Lil Red 7
so rosrex7 where did you get yours from?
can you post a link to the place you bought it from or info please. FD3S Carbon fiber Dash Kit.. |
Originally Posted by fdeeznutz
Holy shit...$328 for a set of floor mats
|
Originally Posted by Taikutsu
thats nothing compaired to the $624 ashtry and lighter haha
the sad thing is that im sure some one has bought it.. |
Originally Posted by fdeeznutz
Holy shit...$328 for a set of floor mats
~Ramy |
All times are GMT -5. The time now is 10:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands