3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Car wouldn't start, easy fix

Thread Tools
 
Search this Thread
 
Old 06-26-08, 11:09 PM
  #1  
official pussy inspector

Thread Starter
 
stlFD's Avatar
 
Join Date: Jan 2003
Location: St. Louis
Posts: 109
Likes: 0
Received 0 Likes on 0 Posts
Car wouldn't start, easy fix

So when I tried to start the car up a few days ago, all I heard was a click when I turned the key. I checked the battery and fuses and both were fine. The solution became apparent when I checked the clutch switch and noticed that the little metal arm that hangs off the clutch pedal and acts on the switch had a hole in it. When I depressed the clutch, the switch plunger passed through the hole. I'm guessing that there was some kind of plastic bolt that passed through the hole and it must have broken off. I fixed it with a hardware store special nut/bolt combo. I hope that leads someone else in the right direction.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
befarrer
2nd Generation Specific (1986-1992)
4
08-14-15 04:18 PM



Quick Reply: Car wouldn't start, easy fix



All times are GMT -5. The time now is 02:09 PM.