3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Car wont start

Thread Tools
 
Search this Thread
 
Old Aug 28, 2010 | 11:35 AM
  #1  
iyad's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 17
Likes: 0
From: brampton
Car wont start

93 canadian fd

took out injectors for cleaning. and now car wont start. take the fuel pump fuse out and it keeps running shitty forever revs up and down just doesnt idle as soon as i plug in fuse it dies? waaa happpend
Reply
Old Aug 28, 2010 | 12:23 PM
  #2  
live2drive15's Avatar
Rotary Enthusiast
Tenured Member 20 Years
iTrader: (4)
 
Joined: Jun 2003
Posts: 832
Likes: 11
From: Northern California
If you pull the fuel pump fuse, the car should eventually die. If i'm not mistaken you have to take apart quite a bit of stuff to get to the injectors. Retrace all the work you did, check to make sure everything is plugged in, no vacuum lines disconnected etc.
Reply
Old Aug 30, 2010 | 05:40 PM
  #3  
iyad's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 17
Likes: 0
From: brampton
im thinking an injector seal didnt sit right and its causing a siphoning action in the fuel line i will take apart and inspect tonight
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM




All times are GMT -5. The time now is 11:40 AM.