3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

car wont start

Old Aug 5, 2008 | 08:51 PM
  #1  
My_fd's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Jun 2005
Posts: 48
Likes: 0
From: wisconsin
car wont start

After deflooding the car it still wont start up for me. The car has been sitting for a year now. Compression on the motor is fine. My spark plugs have been changed last year. I cant seem to find what is cause it not to fire up. It canks but doesnt seem to want to run.

thanks
Reply
Old Aug 6, 2008 | 01:09 AM
  #2  
Coolant_Leak's Avatar
need mo monies
Tenured Member 05 Years
iTrader: (18)
 
Joined: Sep 2007
Posts: 402
Likes: 0
From: Orange/LA County
sounds like what happened to me.
did you do anything to the car before you left it to sit?

check:
clutch switch
security switch/relay
fuel pump (use the diagonosis box and jump the FP and GND and put key in on position then listen to the rear)
also check the CEL signals. use the diag box. and jump the TEN and GND. then look at the blinking lights. meanings are at http://www.rx7city.com/ecucodes.htm

what was wrong with my starting problem was pulley belt tension... i didnt figure that out until i gave up on thinking it was electronical and changed/checked every piece of wiring.


also.. ppl will be asking for more information. so be clear on how/when it stopped. and what have u done before/after the event.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:37 PM.