Car will not turn over at all, please help
#1
Low boost is 18psi *)
Thread Starter
Join Date: Jun 2005
Location: Champaign IL
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Car will not turn over at all, please help
Not sure if anyone remembers but I hvae been putting together a friends Automatic FD lately and I've run into a barricade. I got everything all buttoned back up and went to fire the car up for hte first time, and it does absolutely nothing. The car clicks whenever i turn the key to ignition 1, but then after that i turn the key to start it i dont eve hear the starter trying to click.
I got underneath the car and the starter is getting 12V, but sometimes it would go down to 6V, and im not sure why. I couldnt see the voltage doing anything abnormal while my friend tried to start the car. Next i pulled the starter out and hooked the battery charger to it, it spins, and engages so its fully functional. I started going through the factory manual and started working throuhg the idea the interlock could be the problem. It sais you're supposed to get continuity between several different terminals while the car is in different gears. I'm not seeing these. The manual states to adjust the sensor that monitors that (its on the tranny) but i'm still not seeing anything.
A friend suggested trying to find out if there was a stock security system and trying to disengage it, does anyone have anymore information on this?
I am also getting 2 beeps when i put the key in the ignition. They are two fast beeps and last for about 10 seconds or so.
Any ideas would be greatly appreciated
I got underneath the car and the starter is getting 12V, but sometimes it would go down to 6V, and im not sure why. I couldnt see the voltage doing anything abnormal while my friend tried to start the car. Next i pulled the starter out and hooked the battery charger to it, it spins, and engages so its fully functional. I started going through the factory manual and started working throuhg the idea the interlock could be the problem. It sais you're supposed to get continuity between several different terminals while the car is in different gears. I'm not seeing these. The manual states to adjust the sensor that monitors that (its on the tranny) but i'm still not seeing anything.
A friend suggested trying to find out if there was a stock security system and trying to disengage it, does anyone have anymore information on this?
I am also getting 2 beeps when i put the key in the ignition. They are two fast beeps and last for about 10 seconds or so.
Any ideas would be greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
rx8volks
Canadian Forum
0
08-11-15 10:30 PM